Fix building without audaspace

Fix 'WM_window_find_under_cursor'

This function was not working if the window is partially out of screen space.

Fix default surface resolution U/V mis-match

The resolution for surfaces was 12 for U, 4 for V,
where both should have been set to 4.

Regression in 9a076dd95a01135ea50f9ccc675668db9f2155f4

Fix T91557: Texture Paint Stencil doesnt use assigned UV Layer

Choosing a UV layer would actually affect the overlay in the viewport
and also painting with the mask brush was in that UV space, but the
resulting stencil mask was always applied with the active UV (not the
explicitly selected stencil UV -- the one one is looking at in the
viewport!) to painting.

This has been like that as far as I have checked back (at least 2.79b),
I am surprised this has not come up before, but it does not seem to make
sense at all...

Now use the UV specified for the stencil layer when applying the mask for
painting, so it corresponds to the stencil mask one is looking at in the
viewport.

Maniphest Tasks: T91557

Differential Revision: https://developer.blender.org/D12583

Fix T91607: GPencil Tint modifier "apply" removes the effect

Audaspace: porting upstream pulseaudio fixes.

Fixes T89045 and T91057.

EEVEE fix gloss low roughness error

Up lower clamp on spec_angle to prevent NaN from being generated on intel GPUs at low roughness.

Fixes T88754

Reviewed By: fclem

Maniphest Tasks: T88754

Differential Revision: https://developer.blender.org/D12508

Fix T87801: Eevee ambient occlusion is incorrect on M1 macMini

The issue was caused by `textureSize()` returning the size of the level 0
even when the min texture level is higher than 0.

Using a uniform to pass the correct size fixes the issue.

This issue also affected the downsampling of radiance for reflections and
refractions.

This does not affect anything other than the recusive downsampling shaders.

Fix T91534: GPencil interpolate Sequence fails if stroke has 0 points

In some cases the stroke has 0 points and this must be skipped in the interpolation.

Fix T91511: GPencil weight_get and Vertex Groups not working at expected

The API was checking the number of total weights with the first point of the stroke and this was not valid because each point can have different number of weight elemnts,

Fix T91448: GPencil Fill simplify not working in render

The simplify was hardcode to be disabled in render.

Fix straightline gesture snapping not working for modal tools

This was implemented in {rB14d56b4217f8} but was never working for
tools/operators other than the sculpt line mask tool.

To be precise, the preview actually snapped but the operations (e.g.
mesh bisect, vertex weight gradient) still happened "unsnapped" in
modal. For the sculpt line mask tool this wasnt a problem, because it
only draws a preview while modal, the actual mask was only applied
later.

This solves part one of T91320 (snapping), sculpting also introduced
flipping in {rB7ff6bfd1e0af} which does not make much sense for all
tools, but in bisect this could actually be supported, will add that in
a separate Diff.

ref T91320

Maniphest Tasks: T91320

Differential Revision: https://developer.blender.org/D12470

Fix memory leak if an error occurred assigning id-property sequence

Fix T89241: Scale to fit overflows into a second line

Fix T91159: GPencil Smooth brush is using Affect Pressure but not used

The parameter wa sin the UI but was not used because it was replaced by Use Thickness.

Fix T88433: no greaspencil depsgraph evaluation with certain drivers

When the same stroke was used as a driver variable, this could make this
stroke already tagged as built in the course of building driver
variables (via `build_gpencil`), but then important stuff from
`build_object_data_geometry_datablock` could be missed later on (because
both of these funtions use `checkIsBuiltAndTag`). Most importantly,
setting up operations such as GEOMETRY_EVAL would be skipped entirely.

`build_object_data_geometry_datablock` seems to cover greasepencil just
fine (does the same as `build_gpencil` and more). Proposed solution is to
remove `build_gpencil` entirely. In `build_id` it would then also call
`build_object_data_geometry_datablock` for `ID_GD` IDs. Now the covered
types that _call_ `build_object_data_geometry_datablock` match exactly
to what is covered _inside_ `build_object_data_geometry_datablock`.

Think this "duplication" of functionality was just overseen in
rB66da2f537ae8 [`build_gpencil` existed long before and said commit made
greasepencil a real object with geometry and such].

thx @JacquesLucke for additional input!

Maniphest Tasks: T88433

Differential Revision: https://developer.blender.org/D12324

Fix T91060: GPencil Time Offset Modifier breaks evaluation time

Caused by {rBf3bf87e5887c}.

When using a GPencil Time Offset Modifier, the bGPDlayer>actframe can be
NULL. This can be determined though, but above optimization commit
skipped getting the active frame in this case entirely (with the
intention to only get it if framenumbers did not match).

Now also call BKE_gpencil_layer_frame_get() if actframe is NULL in order
to fetch a valid one if present.

Maniphest Tasks: T91060

Differential Revision: https://developer.blender.org/D12355

Fix T88887: Audio causes issues with Playback when PC put to Sleep, Hibernate or when Screensaver appears

Porting WASAPI device reinitialization from upstream.

Fix error scaling thumbnails to zero dimensions

Follow up to fix for T89868.

Fix T88909: Win32 getTitle() UTF8 Support

In the Win32 platform our setTitle() can properly assign a Unicode
utf-8 window title. Unfortunately our getTitle() will only read regular
8-bit character strings. This means that we can never compare what we
set to what we get. This patch updates getTitle() to use Unicode-aware
GetWindowTextLengthW and GetWindowTextW.

see T88909 for an example of this affecting user experience.

Differential Revision: https://developer.blender.org/D11782

Reviewed by Ray Molenkamp