Blender Git Loki

Fix missing include

Geometry Nodes: Add initializer for attribute creation

Previously we always had to set attribute values after creating
the attribute. This patch adds an initializer argument to
`attribute_try_create` which can fill it in a few ways, which
are explained in code comments.

This fixes T87597.

Differential Revision: https://developer.blender.org/D11045

Bone Overlay: support bone wireframe opacity settings.

When weight painting the bone overlay is extremely intrusive,
effectively requiring either extensive use of hiding individual
bones, or disabling the whole bone overlay between selections.

This addresses the issue by adding two bone opacity sliders that
are used for the 'wireframe' armature drawing mode. One directly
controls the opacity in a uniform way. The other one allows fade
based on the depth between the near and far clip planes in order
to provide an automatic visual cue about which bones are closest.

Armature: add B-Bone lengthwise scaling and custom handle scaling options.

In addition to the base bone transformation itself, B-Bones have
controls that affect transformation of its segments. For rotation
the features are quite complete, allowing to both reorient the
Bezier handles via properties, and to control them using custom
handle bones. However for scaling there are two deficiencies.

First, there are only X and Y scale factors (actually X and Z,
but this is the legacy naming), while lengthwise all segments
have the same scaling. The ease option merely affects the shape
of the curve, and does not cause actual scaling.

Second, scaling can only be controlled via properties, thus
requiring up to 6 drivers per joint between B-Bones to transfer
scaling factors from the handle bone. This is very inefficient.

This patch addresses these deficiencies by adding Length scale
inputs, and providing toggles to apply custom handle local scale
channels to the now four scale-related properties. The 'Length'
name is used to avoid confusion due to the X/Y vs X/Z naming.

The two Length scale inputs control the ratio between the lengths
of the start and end segments of the bone: although for convenience
two inputs are provided, the whole chain is still uniformly scaled
to fit the curve.

A Scale Easing option is provided to multiply the easing value
by the Length scale factors to synchronize them - this produces
a natural scaling effect where both the shape of the curve and
the scale is affected.

The second issue is addressed by providing toggles for each handle
that multiply each of the X, Z, Length and Ease values by the matching
Local Scale channel of the handle bone, thus replacing trivial drivers.
The Scale Easing option has no effect on this process since it's easy
to just enable both Length and Ease buttons.

Finally, this fixes a strange behavior where the segments were not
actually scaled in the Y direction to match their actual length, thus
producing gaps or overlap depending on the shape of the curve. For
transformation the change should be very small if enough segments
are used, but this will affect the results of the Copy Transforms
and Armature constraints, so a backwards compatibility option is
provided. Newly created bones default to the new behavior.

Differential Revision: https://developer.blender.org/D9870

Constraints: refactor the D7437 patch adding Custom Space for constraints.

As mentioned in the comments to that patch, I had an idea for
a different way to do some technical aspects, but it was too
complicated to force changes in the original patch. Thus I submit
this follow up patch.

First, instead of modifying all the get_constraint_targets and
flush_constraint_targets callbacks, introduce wrapper functions
for accessing constraint targets, convert all code to use them,
and handle the new reference there uniformly for all constraints.

This incidentally revealed a place in the Collada exporter that
didn't clean up after retrieving the targets.

Also, tag the special target with a flag so other code can
handle it appropriately where necessary. This for instance
allows dependency graph to know that the Use B-Bone Shape
option doesn't affect this specific target.

Finally, rename and simplify the function for initializing the
custom space, and make sure it is called everywhere necessary.

Differential Revision: https://developer.blender.org/D9732

Constraints: add support for a new Owner Local Space for targets.

Add a new transformation space choice for bone constraints, which
represent the local transformation of the bone in the constraint
owner's local space.

The use case for this is transferring the local (i.e. excluding the
effect of parents) transformation of one bone to another one, while
ignoring the difference between their rest pose orientations.

Owner Local Space replaces the following setup:

* A `child` bone of the `target`, rotated the same as `owner` in rest pose.
* A `sibling` bone of the `target`, positioned same as `child` in rest
pose and using Copy Transforms in World Space from `child`.
* The `owner` bone constraint uses Local Space of `sibling`.

(This analogy applies provided both bones use Local Location)

Since the space list is getting long, this adds a couple of separators.

Differential Revision: https://developer.blender.org/D9493

Limit Rotation: add an Euler Order option and orthogonalize the matrix.

Since Limit Rotation is based on Euler decomposition, it should allow
specifying the order to use for the same reasons as Copy Rotation does,
namely, if the bone uses Quaternion rotation for its animation channels,
there is no way to choose the order for the constraint.

In addition, add a call to orthogonalize the matrix before processing
for the same reasons as D8915, and an early exit in case no limits are
enabled for a bit of extra efficiency.

Since the constraint goes through Euler decomposition, it would remove
shear even before the change, but the rotation won't make much sense.

Differential Revision: https://developer.blender.org/D9626

Copy Transforms: implement Invert, Fix Shear and more Mix options.

This constraint can be naturally viewed as a prototype for a future
4x4 matrix math node (or subset thereof), since its basic semantics
already is matrix assignment. Thus it makes sense to add math options
to this constraint to increase flexibility in the meantime.

This patch adds support for several operations that would be useful:

- An option to fix shear in the incoming target matrix.
- An option to invert the target matrix.
- More ways to combine target and owner matrix.

Shear is known to cause issues for various mathematical operations,
so an option to remove it at key points is useful. In the future node
system this would be a separate operation, but due to the limits of
the constraint stack it has to be built in for now.

Inverting a matrix is also an operation that can be useful to have.
For some uses it may be useful to invert components separately, so
implement this by checking the Mix mode setting to avoid UI options.

Finally, add two more ways to combine the matrices (multiplied by
two due to the necessity for the Before/After choice). Now there
are three combine modes:

Full implements regular matrix multiplication as the most basic option.

Split Channels combines location, rotation and scale separately.
Looking at D7547 there is demand for such a mode in some cases,
and even with nodes it's cumbersome to rig manually every time.

Finally, Aligned emulates the 'anti-shear' Aligned Inherit Scale mode,
and basically uses Full for location, and Split for rotation/scale.

Differential Revision: https://developer.blender.org/D9469

Depsgraph: connect up drivers on various physics properties.

It seems drivers for physics properties weren't being linked to
evaluation nodes. This connects settings used by modifiers
to Geometry; particle settings and rigid body data to Transform
which seems to contain rigid body evaluation; and force fields
to object Transform, since fields can exist on empties.

Differential Revision: https://developer.blender.org/D10088

Geometry Nodes Curves: Rename files

Merge branch 'master' into temp-gpencil-masking

Conflicts:
source/blender/blenloader/intern/versioning_300.c

Merge branch 'master' into geometry-nodes-curve-support

Geometry Nodes: Add initializer for attribute creation

Previously we always had to set attribute values after creating
the attribute. This patch adds an initializer argument to
`attribute_try_create` which can fill it in a few ways, which
are explained in code comments.

This fixes T87597.

Differential Revision: https://developer.blender.org/D11045

GPencil: Only update weights for bezier strokes

Set the update flag to only update the weights when regenerating the
polyline.

Asset Browser: simple panel mix-in class for specific categories

Add a class `AssetBrowserSpecificCategoryPanel` that only shows if the
asset browser is showing a specific set of categories. This makes it
simple for the Pose Library panels to only show when the user has selected
the Animations category.

GPencil: Fix bezier stroke weight painting

The last element of a bezier stroke could not be weight painted.
This was because the checks use line segments to test for a hit and then
pick the first point of that segment to paint the weight. This causes the
problems for the last point.

Instead of testing of the segment is inside the circle, we just test
if the points are inside the circle.

Note that this should also be done for poly strokes at some point,
because it makes the code simpler.

Use "Spreadsheet" instead of "SpreadSheet"

Remove unecessary comment

Fix memory leak

Merge branch 'master' into temp-spreadsheet-row-filter